Martin MAC 2K Wash XB. Strobe: Mechanical, 2-10Hz, Pulse FX Power: 8.7A at 208v (1783W) Electronic Ballasts Data Connector: XLR5 In and Thru, and XLR3 In and Thru Power Connector: TRUE1, TRUE1 to L6-15, L6-20 or PowerCON adapters available by request CL default profile: 16bit - 21 Channels Typically ships (2) in a Tall Standard Case.
This is a great deal for 1500w wash fixtures, in very good conditions with years of service ahead. For the money and effects delivered, this is the best deal in the world today for a wash fixture; available with case when purchased in pairs. Contact andy@shsglobal.com for inquiries.
Martin Professional’s MAC 2000 Wash XB, a 1500 W Fresnel that takes the proven qualities of the precious Martin wash fixtures and adds even greater brightness. New efficient fans, ballast and starter combine optics and effects to produce one of the best wash lights on the market - and all in the same compact MAC 2000 design. A 1500-watt Osram lamp enables an extremely bright output of over 60,000 lumens, depending on the lens option used. That’s 40% brighter than a MAC 2000 Wash! The new electronic ballast offers hot-lamp re-strike and the advantage of flicker-free light, and new powerful fans ensure that the extra heat generated by the lamp is removed efficiently.The extremely high output from the MAC 2000 Wash XB is made possible by a combination of high efficacy and very efficient optics. If users require the XB to match the power output of existing 1200 W fixtures, a reduced 1200 W mode can be employed, saving energy and increasing lamp life. The XB’s two four-position (plus open) color wheels are interchangeable, allowing designers to perfectly complement the fixture’s CMY color mixing system. A continuously variable color correction system adds the flexibility to gradually and smoothly increase or decrease color temperature.
Features
MAC 2000 Wash XB Data | |
PHYSICAL | Length: 408 mm (16.1 in.) |
Width: 490 mm (19.3 in.) | |
Height: 750 mm (29.5 in.), head straight up | |
Weight: 38 kg (83.8 lbs.) | |
LAMP | Type: 1500 W short arc discharge |
Fitted as standard: Osram HTI 1500 W/D7/60 SharXS | |
Color temperature: 6000 K | |
CRI (Color rendering index): >90 | |
Average lifetime: 750 hours | |
Hot restrike: Yes | |
Socket: Double-ended SFc 10-4 with key | |
Ballast: Electronic | |
DYNAMIC EFFECTS | Color mixing: CMY, independently variable 0 - 100% |
Color correction: 0 - 178 mireds, continuously variable | |
Color wheel: 2 wheels, each with 4 interchangeable filters + open position | |
Mechanical dimmer: 0 - 100% | |
Shutter: Strobe effect up to 10 Hz, pulse effects, instant open and blackout | |
Zoom: Very narrow (micro-Fresnel) 9.5° - 33° Narrow (PC lens) 12.5° - 35°, | |
Medium (Fresnel lens) 12.5° - 39°, Very wide (multi-array lens) 73° - 91°, | |
all with 50 mm (2.0 in.) aperture | |
Hyper mode: Narrow beam with diffuser removed | |
Pan: 540° | |
Tilt: 267° | |
CONTROL AND PROGRAMMING | DMX channels: 19/21 |
Setting and addressing: Control panel with LED display | |
16-bit control: Pan & tilt | |
Movement control options: Tracking and vector | |
Protocol: USITT DMX512/1990 | |
Receiver: Opto-isolated RS-485 | |
Firmware update: Serial upload via DMX link | |
CONSTRUCTION | Color(s): Black |
Housing: UV-resistant fiber-reinforced composite | |
Reflector: Glass, cold light | |
Protection rating: IP20 | |
INSTALLATION | Mounting points: 4 pairs of 1/4-turn locks, 45° orientation possible |
Orientation: Any | |
CONNECTIONS | AC power input: 3 m (9.8 ft.) integral cable without power plug |
DMX data in/out: 3-pin and 5-pin locking XLR | |
ELECTRICAL | AC power: 200-240 V nominal, 50/60 Hz |
Power supply unit: Auto-ranging electronic switch-mode | |
Main fuse: 15 AT (x 2) | |
TYPICAL POWER AND CURRENT | 200 V, 50 Hz: 1787 W, 9.0 A, PF 0.993 |
208 V, 60 Hz: 1793 W, 8.7 A, PF 0.991 | |
230 V, 50 Hz: 1780 W, 7.8 A, PF 0.989 | |
230 V, 60 Hz: 1787 W, 7.9 A, PF 0.987 | |
240 V, 50 Hz: 1773 W, 7.5 A, PF 0.988 | |
Measurements made at nominal voltage. Allow for a deviation of +/- 10%. | |
THERMAL | Cooling: Filtered forced air (temperature-regulated) |
Maximum ambient temperature (Ta max.): 40° C (104° F) | |
Maximum surface temperature, steady state, Ta=40° C (104° F): 175° C (347° F) | |
Total heat dissipation | |
(calculated, +/- 10% at 230 V, 50 Hz): 6120 BTU/hr. | |
APPROVALS | EU safety: EN 60598-2-17 |
EU EMC: EN 55 015, EN 55 103-1, EN 61 547 | |
US safety: UL 1573 | |
Canadian safety: CSA E60598-1, E598-2-17 |
MAC 2000 Wash XB Schematic
Code | Name | Image | Price |
2121705 | 75C176 BiCMOS RS485 Transceive | $6.50 | |
4401102 | Magnet 2x2x2 mm | $1.20 | |
5000008 | 12V DC Relay 16A/250V | $30.00 | |
5020039 | Fuse, 15A Slow 3AB | $1.50 | |
5020040 | Fuse, 20AT 6.3 x 32 mm | $1.80 | |
5031021 | Fuse holder, M2K | $11.60 | |
M05031022 | Cap, Fuse holder MAC 2K | $13.80 | |
5031023 | Protection cap, Fuse Holder. M2K | $2.30 | |
5040023 | NEW PART# 5050874 | $0.00 | |
5040041 | NEW PART# 5050877 | $0.00 | |
5520503 | Switch, 5A/250V MAC2K | $9.50 | |
5520504 | Switch, 5A/250v w/o arm MAC2K | $10.10 | |
5701202 | Motor, step 14PM-M204, 12mm shaft | $67.30 | |
5701602 | NMB Stepmotor std small | $70.50 | |
5701603 | NMB Stepmot.std.small.12mm sh | $70.50 | |
5701607 | Motor, Shutter, M2K & MAC 600/600NT | $76.90 | |
5701652 | NEW PART# 05701602 | $0.00 | |
5703801 | Motor, pan/tilt MAC2000 | $92.60 | |
6100016 | Ballast, Electronic, 1500W, M2K Wash XB | $1,700.00 | |
8052701 | M3 hex lock nut | $0.10 | |
8070502 | M4x12 Cross recessed Cs. black | $0.10 | |
8111214 | M6*30, Screw, Allen | $1.40 | |
8230113 | Starlock 5 mm shaft retaining ring | $0.20 | |
8240106 | 1/4 turn fastener, retaining spring 4mm | $1.20 | |
8240109 | 1/4 turn fastener receptacle 4mm | $1.60 | |
8240113 | Wingbolt, 1/4 turn Fastener, Omega Bracket | $6.70 | |
8240114 | 1/4 Turn Fastener, Retainer, Omega Bracket | $1.10 | |
8240122 | 1/4 turn stud, DzusPanex 4x17 | $3.70 | |
11541004 | Mains cable 3x2,5#300cm.. | $31.70 | |
11860034 | Wireset, arm, right, M2K Wash.. | $105.70 | |
11860037 | Wireset, base arm, MAC 2000 Wa | $304.20 | |
16040050 | Belt, Pan, MiniMac | $4.50 | |
16040090 | Timing Belt 3S564 | $5.00 | |
16040190 | Timing belt, MXL, L=634, T=312x3, | $9.10 | |
16060070 | Timing Belt, 118 MXL 4,0 Red | $22.00 | |
16740020 | Snap-lock for timing belt, PPS | $2.10 | |
18000280 | Mek. stop, MAC2000 | $1.10 | |
18400030 | Opto encoder wheel M2K | $10.80 | |
20800070 | Air filter PPI-80C MAC2000 | $1.40 | |
41002080 | Reflector, M2K Wash/Mac 700 Wash | $342.60 | |
41102027 | Heat Filter, 94x47x2 **USE PN# 41102070 | $85.10 | |
M41102070 | Heat Filter glass, 94X47X2 | $58.00 | |
41600040 | Zoom diffuserlens for M2K Wash | $380.90 | |
50300510 | PCB, M2K SMPS ASM - MARTIN | $848.60 | |
55203003 | Front Module, Fresnell, M2K | $413.40 | |
62000085 | PCB, M2K Wash main PCB | $900.00 | |
62000502 | PCB, M2K Display/Keyb... | $172.90 | |
62003013 | PCB, NTC thermistor, mounted | $6.20 | |
62003015 | PCB, Duo Optical sensor 5mm ga | $28.90 | |
62003017 | PCB, Hall Sensor, Mac 2000 Perf | $14.50 | |
62003019 | PCB, Hall Sensor, M2K Perf | $14.50 | |
62004554 | PCB, 3 and 5 pin XLR, m/f , mounted | $64.10 | |
62004571 | PCB connector, yoke, MAC 2000 | $160.10 | |
62006012 | Mains Filter, 1200 Watt, M2K (Not XB)/Old Style MAC700 | $23.60 | |
5221209LP | Socket, M2K, MAC700 | $75.00 | |
91602001 | Omega bracket, new w. 1/4-turn | $53.90 |